If your tub is anything like ours hair is constantly clogging the drain and causing water to back up. But plungers and store-bought drain uncloggers can only do so much. If the hair clog is bad enough you’ll need to use a drain snake.
Here’s a step-by-step guide on how to use a drain snake to clear a hair clog from your tub:
1. Start by removing the drain cover. This will give you access to the hair clog.
2. Insert the drain snake into the drain. Keep pushing it down until you feel resistance.
3. Once the drain snake hits the hair clog start twisting it. This will help to loosen the clog.
4. Keep twisting and pushing the drain snake until the hair clog starts to come loose.
5. Slowly pull the drain snake out of the drain. The hair clog should come out with it.
6. Discard the hair clog and replace the drain cover.
7. Run some hot water down the drain to make sure it’s clear.
If you’re still having trouble you may need to call a plumber. But a drain snake should take care of most hair clogs.
What is a drain snake?
Answer: A drain snake is a long flexible rod that is used to remove clogs from drains.
How do you use a drain snake?
Answer: To use a drain snake you insert the flexible rod into the drain and rotate it to break up the clog.
What are some benefits of using a drain snake?
Answer: Some benefits of using a drain snake include being able to remove clogs without chemicals being able to reach clogs that are located further down the drain and being able to clear multiple drains at once.
Are there any risks associated with using a drain snake?
Answer: Some risks associated with using a drain snake include puncturing the drain breaking the drain snake and making the clog worse.
How do you know if a drain snake is the right tool for the job?
Answer: You know a drain snake is the right tool for the job if the clog is located further down the drain and is made up of hair grease or food.
How do you know if a drain snake is the wrong tool for the job?
Answer: You know a drain snake is the wrong tool for the job if the clog is located near the drain opening and is made up of paper products or plastic.
What should you do if the drain snake gets stuck?
Answer: If the drain snake gets stuck you should try to rotate it in the opposite direction to loosen it.
If that doesn’t work you can try to push it through the clog.
What should you do if the drain snake breaks?
Answer: If the drain snake breaks you should remove it from the drain and disassemble it to remove the broken pieces.
Can a drain snake be used on all types of drains?
Answer: Drain snakes can be used on most types of drains but they are not suitable for every type of drain.
What are some types of drains that a drain snake cannot be used on?
Answer: Some types of drains that a drain snake cannot be used on include toilets septic tanks and drains with sharp bends.
How often should you clean your drain snake?
Answer: You should clean your drain snake after each use.
How do you clean a drain snake?
Answer: To clean a drain snake you should rinse it off with water and then disinfect it with a vinegar solution.
Where can you buy a drain snake?
Answer: You can buy a drain snake at most hardware stores or online.
How much does a drain snake cost?
Answer: The cost of a drain snake varies depending on the size and brand but they typically range from $10 to $30.
What are some alternatives to using a drain snake?
Answer: Some alternatives to using a drain snake include using a plunger or a drain auger.
