If you have a clogged main drain one of the best ways to clear it is with a snake. A snake is a long flexible rod that you can insert into the drain to clear away any obstructions. Here’s how to use a snake to unclog a main drain:
1. Start by removing the drain cover. This will give you access to the drain so you can insert the snake.
2. Put on some rubber gloves to protect your hands.
3. Insert the snake into the drain. Push it down until you feel resistance.
4. Begin to turn the snake. As you turn it the snake will travel down the drain and hopefully push any obstructions out of the way.
5. Keep turning the snake until you feel it come to an end. At this point you can either remove the snake and see if the drain is clear or you can keep turning it to see if you can clear the obstruction entirely.
6. If the drain is still clogged you can try inserting the snake into the drain from a different direction. Sometimes this can help to clear the obstruction.
7. Once the drain is clear be sure to wash your hands thoroughly and replace the drain cover.
If you have a clogged main drain a snake is a great tool to use to try to clear it. Be sure to follow the steps above carefully to avoid making the problem worse.
How do you unclog a main drain with a snake?
You insert the snake into the drain and turn it until you feel resistance.
Then you push the snake through the clog until it breaks through.
What is the best type of snake to use on a main drain?
A power snake is the best type of snake to use because it can quickly and easily break through clogs.
How do you insert the snake into the drain?
You insert the snake into the drain by inserting the head of the snake into the drain and then pushing it through until the entire snake is in the drain.
How do you know when the snake has broken through the clog?
You know the snake has broken through the clog when you feel resistance as you are pushing it through the drain.
How do you remove the snake from the drain?
You remove the snake from the drain by pulling it out slowly and carefully.
What should you do if the snake gets stuck in the drain?
If the snake gets stuck in the drain you should turn it off and pull it out slowly and carefully.
What should you do if the clog is too difficult for the snake to break through?
If the clog is too difficult for the snake to break through you should call a plumber.
What are some signs that there is a clog in the main drain?
Some signs that there is a clog in the main drain are slow draining water backing up into the sink or tub and strange noises coming from the drain.
How often should you snake the main drain?
You should snake the main drain every few months to prevent clogs.
What are some things that you should not put down the drain?
Some things that you should not put down the drain are grease food hair and coffee grounds.
What will happen if you put these things down the drain?
If you put these things down the drain they will build up and cause a clog.
How can you prevent clogs in the main drain?
You can prevent clogs in the main drain by not putting grease food hair and coffee grounds down the drain.
You should also snake the drain every few months.
What should you do if you have a clog?
If you have a clog you should use a snake to try and break through the clog.
If the snake does not work you should call a plumber.
What are some things that a plumber can do to clear a clog?
Some things that a plumber can do to clear a clog are use a power snake or a hydro jet.
What is the difference between a power snake and a hydro jet?
A power snake is a mechanical device that is used to break through clogs.
A hydro jet is a high-pressure water device that is used to clear clogs.
