If you’re a fan of big air and gnarly descents then the FOX Float X2 is the rear shock for you. This high-performance coil shock features FOX’s revolutionary Dual Piston Base Valve (DPX2) which provides exceptional tuning capabilities for both low-speed compression and high-speed rebound. The result is unmatched control and adjustability so you can tackle any trail with confidence.
Here’s a step-by-step guide on how to set up your FOX Float X2:
1. Remove the old shock from your bike. If you’re installing the X2 on a new bike you’ll need to remove the shock that came stock with the bike.
2. Install the X2 in the frame. Make sure that the shock is properly seated in the frame before proceeding.
3. Connect the shock to the frame. Once the shock is in place you’ll need to connect it to the frame. There are two ways to do this:
Option 1: Use the included mounting hardware to connect the shock to the frame.
Option 2: Use the FOX Shox air sleeve to connect the shock to the frame. This is the recommended method as it provides a more secure connection.
4. Inflate the shock. Use a shock pump to inflate the shock to the desired air pressure.
5. Adjust the air spring pressure. The air spring pressure determines how firm or soft the shock feels. More pressure will result in a firmer ride while less pressure will make the shock feel softer.
6. Adjust the low-speed compression. The low-speed compression dial controls how the shock responds to small bumps and pedaling inputs.
7. Adjust the high-speed compression. The high-speed compression dial controls how the shock responds to big hits and square-edge bumps.
8. Adjust the rebound. The rebound adjustment controls how quickly the shock returns to its original position after being compressed.
9. Test ride the bike. Once you’ve dialed in the settings take the bike out for a spin to see how it feels. Make any necessary adjustments until you’re happy with the way the bike feels.
How do you set up a Fox Float X2 air shock?
You will need a spanner wrench and a shock pump.
First remove the old air shock from the bike.
Next use the spanner wrench to unscrew the air valve cap and release any air that is in the air shock.
Next use the shock pump to pump air into the air shock until it is at the desired air pressure.
Finally screw the air valve cap back on and reinstall the air shock onto the bike.
What is the recommended air pressure for a Fox Float X2 air shock?
The recommended air pressure for a Fox Float X2 air shock is approximately 200 PSI.
How do you know if you have enough air in your Fox Float X2 air shock?
You will know you have enough air in your Fox Float X2 air shock when the air pressure gauge on the shock pump reads 200 PSI.
How do you know if you have too much air in your Fox Float X2 air shock?
You will know you have too much air in your Fox Float X2 air shock if the air pressure gauge on the shock pump reads over 200 PSI.
What happens if you put too much air in your Fox Float X2 air shock?
If you put too much air in your Fox Float X2 air shock the air shock will become excessively firm and may bottom out on small bumps.
How do you release air from your Fox Float X2 air shock if you have too much air in it?
To release air from your Fox Float X2 air shock use a spanner wrench to unscrew the air valve cap and release some air.
What is the recommended air pressure for a Fox Float X2 air shock if you weigh less than 150 pounds?
The recommended air pressure for a Fox Float X2 air shock if you weigh less than 150 pounds is approximately 150 PSI.
What is the recommended air pressure for a Fox Float X2 air shock if you weigh between 150 and 250 pounds?
The recommended air pressure for a Fox Float X2 air shock if you weigh between 150 and 250 pounds is approximately 200 PSI.
What is the recommended air pressure for a Fox Float X2 air shock if you weigh over 250 pounds?
The recommended air pressure for a Fox Float X2 air shock if you weigh over 250 pounds is approximately 250 PSI.
Can I adjust the air pressure in my Fox Float X2 air shock while I am riding?
No you should not adjust the air pressure in your Fox Float X2 air shock while you are riding.
Doing so could cause the air shock to become damaged or fail.
Where is the air valve on a Fox Float X2 air shock?
The air valve on a Fox Float X2 air shock is located on the bottom of the air shock near the bottom mounting point.
How do I know if my Fox Float X2 air shock is leaking air?
You will know your Fox Float X2 air shock is leaking air if the air pressure gauge on the shock pump drops below the desired air pressure after you have pumped air into the shock.
How do I fix a leaking Fox Float X2 air shock?
To fix a leaking Fox Float X2 air shock use a shock pump to pump more air into the shock.
If the leak persists you may need to replace the O-ring seals on the air valve.
Can I put oil in my Fox Float X2 air shock?
No you should not put oil in your Fox Float X2 air shock.
The air shock is lubricated with air and adding oil will damage the air shock.
How often should I check the air pressure in my Fox Float X2 air shock?
You should check the air pressure in your Fox Float X2 air shock at least once a week.
