If you’re a hunter chances are you’ve thought about making your own deer feeder. After all why buy one when you can make your own out of PVC pipe? PVC pipe is relatively cheap and easy to work with so it’s the perfect material for a DIY deer feeder. Plus it’s durable and weather-resistant so it will last for years.
In this article we’ll show you how to make a deer feeder out of PVC pipe. We’ll also give you some tips on how to place and maintain your feeder.
First you’ll need to gather some supplies. You’ll need a length of PVC pipe (at least 10 feet long) some PVC fittings a drill a saw and some wire or rope. You’ll also need some deer feed of course. We recommend a high-quality feed that is designed for deer. You can find this at most hunting or outdoor stores.
Once you have your supplies you’re ready to get started. The first step is to cut your PVC pipe into pieces. You’ll need four pieces that are about 3 feet long and four pieces that are about 2 feet long. You can use a handsaw or a power saw for this.
Next you’ll need to drill holes in the PVC pipe. The holes should be about an inch from the top and bottom of each piece of pipe. Make sure that the holes are large enough for the wire or rope to fit through.
Now it’s time to assemble the feeder. Take two of the 3-foot pieces of PVC pipe and place them upright about 2 feet apart. Then take two of the 2-foot pieces of pipe and place them across the top of the upright pieces creating a cross. The holes that you drilled should line up.
Now take the remaining two pieces of pipe and place them across the middle of the feeder creating another cross. Make sure that the holes line up and then secure the pieces together with the wire or rope.
Your deer feeder is now complete! To fill it simply lift up the middle cross piece and pour in your deer feed. Be sure to put the feeder in a location where the deer will be able to find it easily. You may need to experiment a bit to find the perfect spot.
You should check your deer feeder regularly to make sure that the deer are eating the feed and that the feeder is in good condition. If you notice that the deer are not eating the feed try moving the feeder to a different location.
Making your own deer feeder is a great way to save money and attract deer to your property. With a little DIY know-how you can easily build a PVC deer feeder that will last for years.
How do you make a deer feeder out of PVC pipe?
Answer 1: Cut a section of PVC pipe that is about three feet long.
Cut a smaller section of PVC pipe that is about 18 inches long.
Connect the two pieces of PVC pipe together with a 90-degree elbow joint.
Place the smaller section of PVC pipe inside of the larger section of PVC pipe.
This will be the section that the deer feed goes into.
Fill the smaller section of PVC pipe with deer feed and screw on the cap.
Hang the deer feeder from a tree branch or post using a length of PVC pipe or wire.
What is the best type of deer feed to use in a PVC deer feeder?
Answer 2: The best type of deer feed to use in a PVC deer feeder is a high quality deer feed that is designed to attract deer.
How often should you fill a PVC deer feeder?
Answer 3: You should fill a PVC deer feeder every two weeks or as needed.
How do you keep squirrels from eating the deer feed in a PVC deer feeder?
Answer 4: You can keep squirrels from eating the deer feed in a PVC deer feeder by placing a squirrel baffle on the top of the feeder.
What is the best way to hang a PVC deer feeder?
Answer 5: The best way to hang a PVC deer feeder is from a tree branch or post using a length of PVC pipe or wire.
How do you clean a PVC deer feeder?
Answer 6: You can clean a PVC deer feeder by unscrewing the cap and dumping out the old deer feed.
rinse the inside of the feeder with water and let it air dry.
What can you do to keep deer from knocking over a PVC deer feeder?
Answer 7: You can keep deer from knocking over a PVC deer feeder by attaching it to a tree trunk or post with a strap or rope.
What is the best place to put a PVC deer feeder?
Answer 8: The best place to put a PVC deer feeder is in an open area where deer frequent.
How do you make a PVC deer feeder more stable?
Answer 9: You can make a PVC deer feeder more stable by attaching it to a tree trunk or post with a strap or rope.
What can you use to keep deer from knocking over a PVC deer feeder?
Answer 10: You can use a strap or rope to keep deer from knocking over a PVC deer feeder.
