Making a homemade snake for your toilet may seem like a daunting task but it’s actually quite simple! All you need is a length of flexible wire a small drain auger and a plunger. Here’s how to do it:
1. Begin by straightening out the flexible wire. Then feed it through the small drain auger until it comes out the other end.
2. Next take the plunger and place the wire through the hole in the center of the plunger.
3. Now it’s time to start snake-making! Hold onto the end of the wire with one hand and use the other hand to twist the plunger clockwise. As you twist the wire will start to coil around the plunger.
4. Keep twisting until the entire length of wire is coiled around the plunger. Then remove the plunger from the wire coil.
5. Your homemade snake is now ready to use! To use it simply insert the snake into your toilet drain and start twisting. The wire will cut through any clogs hair or other debris that may be causing your toilet to back up.
What do you need to make a homemade snake for a toilet?
Answer 1: You will need a wire hanger a pair of pliers and a plunger.
How do you straighten out the wire hanger?
Answer 2: Use the pliers to straighten out the wire hanger.
How do you make the hook on the end of the wire hanger?
Answer 3: Use the pliers to make a small hook on the end of the wire hanger.
What do you do with the hook?
Answer 4: You will use the hook to snag the clog in the toilet.
How do you use the plunger with the wire hanger?
Answer 5: Place the plunger over the wire hanger and use it to push the wire hanger down into the toilet.
What do you do once the wire hanger is down the toilet?
Answer 6: Hook the wire hanger onto the clog and pull it up and out of the toilet.
How do you dispose of the clog?
Answer 7: Once the clog is out of the toilet you can dispose of it in the trash.
How do you disinfect the toilet?
Answer 8: Use a toilet brush to scrub the inside of the toilet bowl and flush the toilet to rinse away any lingering dirt or debris.
How do you know if your homemade snake for the toilet is working?
Answer 9: To test if your homemade snake is working flush the toilet and see if the water drains away normally.
If it does then your snake is working!
What do you do if your homemade snake doesn’t work?
Answer 10: If your homemade snake doesn’t work you may need to use a plunger to help push the clog down the drain.
What do you do if the clog is too big to be removed with a homemade snake?
Answer 11: If the clog is too big to be removed with a homemade snake you will need to call a plumber.
What are some tips for using a homemade snake for a toilet?
Answer 12: Some tips for using a homemade snake for a toilet include:
-Wearing gloves to protect your hands from getting dirty
-Making sure the wire hanger is straight before inserting it into the toilet
-Hooking the wire hanger onto the clog and pulling it up and out of the toilet in one smooth motion
How frequently should you snake your toilet?
Answer 13: You should snake your toilet as needed but generally it’s a good idea to snake it at least once a week.
What are some signs that your toilet needs to be snaked?
Answer 14: Some signs that your toilet needs to be snaked include:
-The toilet is draining slowly
-The toilet is overflowing
-There is sewage backup in the toilet
What are some things you should not do with a homemade snake for a toilet?
Answer 15: Some things you should not do with a homemade snake for a toilet include:
-Forcing the snake down the drain if it’s not going easily
-Leaving the snake in the toilet overnight
-Allowing the snake to come into contact with your skin
