If your sink has been draining slowly or water is backing up out of the sink then it’s time to snake the drain. Snaking a sink drain is relatively easy and can be done without having to call a plumber. Here’s a step-by-step guide on how to snake a sink drain.
What You’ll Need:
-plunger
-bucket
-vinegar
-baking soda
-plumbing snake
Step 1:
Clear the area around the sink and place a bucket underneath the drain. This will catch any water that comes up when you’re snaking the drain.
Step 2:
If the sink is full of water use a plunger to try and dislodge the blockage. Pump the plunger up and down several times before pulling it off the drain.
Step 3:
Pour a cup of vinegar and a cup of baking soda down the drain. Let this sit for a few minutes before flushing with hot water. The vinegar and baking soda will help to break down the grease and debris that’s causing the blockage.
Step 4:
Feed the plumbing snake into the drain. You may need to use some force to get the snake past the blockage. Once you’ve fed the snake a few feet into the drain start turning the handle. The snake will start to spin and will break up the blockage as it goes.
Step 5:
Keep turning the handle on the snake until you feel it start to resistance. This means that the blockage has been cleared and the snake is no longer spinning.
Step 6:
Remove the snake from the drain and flush with hot water to remove any debris.
That’s it! You’ve successfully cleared your sink drain without having to call a plumber.
How do you snake a sink drain?
You will need a drain snake and a bucket.
First remove the drain cover and insert the drain snake into the drain.
Next turn the drain snake handle clockwise to push the snake through the drain.
Finally pull the drain snake out of the drain and empty the bucket.
What is the best way to snake a sink drain?
The best way to snake a sink drain is to use a drain snake and a bucket.
First remove the drain cover and insert the drain snake into the drain.
Next turn the drain snake handle clockwise to push the snake through the drain.
Finally pull the drain snake out of the drain and empty the bucket.
What do you need to snake a sink drain?
You will need a drain snake and a bucket.
First remove the drain cover and insert the drain snake into the drain.
Next turn the drain snake handle clockwise to push the snake through the drain.
Finally pull the drain snake out of the drain and empty the bucket.
Why do you need to snake a sink drain?
You may need to snake a sink drain if it is clogged.
A drain snake can help to clear the clog.
When do you need to snake a sink drain?
You will need to snake a sink drain when it is clogged.
How often do you need to snake a sink drain?
You should snake a sink drain as often as needed depending on how often it becomes clogged.
What are the steps to snake a sink drain?
The steps to snake a sink drain are as follows: first remove the drain cover and insert the drain snake into the drain.
Next turn the drain snake handle clockwise to push the snake through the drain.
Finally pull the drain snake out of the drain and empty the bucket.
How do you know when the sink drain is unclogged?
You will know the sink drain is unclogged when the water drains freely from the sink.
What do you do if the sink drain is still clogged after snaking?
If the sink drain is still clogged after snaking you may need to use a plunger or a chemical drain cleaner.
What are some things you should not do when snaking a sink drain?
Some things you should not do when snaking a sink drain include using too much force pushing the snake too far into the drain and leaving the snake in the drain for too long.
What are some things you can do to prevent sink drains from becoming clogged?
Some things you can do to prevent sink drains from becoming clogged include using a drain cover not putting food down the drain and not putting grease down the drain.
What is the best way to clean a sink drain?
The best way to clean a sink drain is to use a drain snake and a bucket.
First remove the drain cover and insert the drain snake into the drain.
Next turn the drain snake handle clockwise to push the snake through the drain.
Finally pull the drain snake out of the drain and empty the bucket.
What is the best way to unclog a sink drain?
The best way to unclog a sink drain is to use a drain snake and a bucket.
First remove the drain cover and insert the drain snake into the drain.
Next turn the drain snake handle clockwise to push the snake through the drain.
Finally pull the drain snake out of the drain and empty the bucket.
What are some home remedies for a clogged sink drain?
Some home remedies for a clogged sink drain include using a plunger using a drain snake and using a chemical drain cleaner.
What are some tips for using a drain snake?
Some tips for using a drain snake include using a bucket removing the drain cover and turning the drain snake handle clockwise.
